Corrections on Harvest Dry Weights
Ensure Accurate Dry Weight Corrections in Harvest Batches
This article outlines the validated procedures for correcting Harvest Batch dry weights directly within the Cannavigia software. Whether the recorded weight needs to be decreased or increased, the step-by-step instructions below provide cultivation professionals with a compliant framework.
Following these steps ensures the Harvest Batch dry weight is accurately corrected.
When the total available dry weight exceeds the expected value and needs to be reduced:
- Go to Cultivation > Harvest and open the harvest batch where you want to correct the weight
- Once open, you can see that the Total Available Weight is the same as in the Weight Log tab in the Harvest Batch
-
In the Harvest Batch, click Actions and select the Log Loss option
-
The Log Loss window will open, select Corrections on the Reason field
- Enter the difference between the incorrect (total available) and correct weight (in this example the available weight was 25kg and the correct value is 24kg, the Lost weight in this field should be 1kg)
- Finally click Save to record the correction
- Observe that the dry weight is updated
When the total available dry weight is below the expected value and needs to be increased:
-
In the Harvest Batch Click Actions and select the Weigh in Dry Weight option
-
The Weigh in Dry Weight window will open, enter the difference between the incorrect (total available) and correct weight (in this example the available weight was 24kg and the correct value is 29kg, the Dry Weight in this field should be 5kg) and click Add to table
- After the weight has been added to the table, you can still remove it and enter a different value in case of any mistake, after that click Save to record the action
- Observe that the dry weight is updated